One of the nicest things that people can, in their homes a beautiful swing, is that the use, finally able to relax and unwind in the lazy afternoon. At the same time able to maintain a beautiful swing and have fun with their children, giving them a safe, fun, entertainment and activities. By following this short guide on how to build a nice easy swing, now spend hours and hours just around the courtyards.
The basic tools are needed to buildNice swing includes a shovel, a saw and a drill. At the same time, a ratchet and a hammer can be very useful if you set a very nice little fluctuation in the house. On the other hand, there are some subjects that you can not do without, especially when you swing. U-bolts, pipe cement and nails have all the features of this simple project. Other materials needed are water, sand, cement, screws, bolts, swing, yet check, sandpaper, 2x4-stock "and 2x10 inchesCamp.
building a Swing lot can set at home, the basic five-step process, namely choosing the right place may be divided, the construction of its foundation, cutting wood, installing a swing and a final touch. After successfully collecting all the tools and materials needed for this simple project are necessary, which can now build their very own rocking the house with reference to this guide.
1. When you choose a good location for one swing, youposition must be a safe and stable, ensuring that everyone uses, which can get out safe and unharmed. At the same time, the land where the swing is made of earth must be solid.
2. During the holes in the foundations built on the ground, must be a minimum depth of one inch in diameter and ten centimeters. In places where the weather is really deep, make sure the holes are dug deeper than the frost line. Enter cement pipes in the holes, and then pour theCement to strengthen the foundations. On the top of the cement drying instead of an anchor in preparation for the next phase of the process.
3. Take four pieces of 2x4-inch cut-parts and, at their ends. Miter one end of the stock in the 2x10-inch top bar and the other end of anchor foundations. To create a mid-point attachment to the Forums leg cut horizontal axes in touch and connect together.
4. For mounting the plates, one leg a few cardsin a vise, then drill holes in the middle of the boards of the legs. Create a funnel-shaped extension at the outer end of the forum. Create eye-hole at the top of the beam, and then along the top edge, horizontal panels, support panels and legs. If all components are completed, attach it to the Foundation.
5. Now that the oscillation is almost finished, the project to control everything and look for some shortcomings. Sandpaper to remove in order toCan splinters and areas of maximum to be harmful to the user. As a final touch, paint all the wood components of the swing. As a precautionary measure must first wood before painting with an oil-based material. At the same time, it is much better, not cause-based paint for this project.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น